Compass 2WD L4-2.4L (2008)
Flywheel: Service and Repair
Installation
INSTALLATION
WARNING: DaimlerChrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or
may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust
and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling,
processing and disposing of dust and debris
1. Clean the surfaces of the flywheel and pressure plate to make certain that all oil, grease, and rust have been removed.
2. Install and torque the flywheel-to-crankshaft bolts to 95 Nm (70 ft.lbs.).
3. Install clutch pressure plate and disc See: Clutch/Clutch Disc/Service and Repair/Clutch Disc - Installation.
4. Install transaxle assemblySee: Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Manual Transmission/Transaxle -
Installation.