Compass 2WD L4-2.4L (2008)
1. Bead dimensions should be approximately 9.5 mm (0.375 in) wide (4) by 12.7 mm (0.50 in) in height (1).
NOTE: Compass shown, Patriot similar.
NOTE: Adhesive locations are measured from the center of the bead to the edge of the glass.
2. Apply bead (5) of adhesive with a triangular nozzle directly to the quarter glass seal starting at bottom in center of the quarter glass.
3. Locate the bead (5) of adhesive onto the primed glass surface (2) as indicated.
CAUTION: Always apply bead of adhesive to the quarter glass. Always install the quarter glass within 5 minutes after applying adhesive.