Compass 2WD L4-2.4L (2008)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Removal
REMOVAL
1. Remove the door trim module (1), See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear
Door Module Trim - Removal.
2. Remove the two screws and remove the foam block.
3. Remove the inner belt weatherstrip (1) from the door using the Remover, Outer Door Belt Molding 9093 special tool, if necessary.
4. Remove the rear door glass foam blocker and slide the glass down and out of the glass track (2).
5. Remove the screws (1) and remove the glass run assembly (2) from the door.
