Compass 4WD L4-2.0L (2009)
1. Position mount (4) and tighten bolts to 47 Nm (35 ft. lbs.).
2. Install fore aft member (3) and tighten bolts to 100 Nm (74 ft. lbs.).
3. Install mount through bolt (1) and tighten to 47 Nm (35 ft. lbs.).
4. Lower vehicle.
Right
INSTALLATION
1. Position right engine mount (1).
2. Install engine mount retaining bolts and tighten to 75 Nm (55 ft. lbs.).
3. Install engine mount adapter (2) and tighten bolts (3) to 68 Nm (50 ft. lbs.).
4. Install engine mount through bolt (4) and tighten to 88 Nm (65 ft. lbs.).
5. Remove jack.
