Compass 4WD L4-2.4L (2008)
Battery Tray: Service and Repair
Battery Tray - Installation
INSTALLATION
1. Place the battery tray (3) into the engine compartment over the left frame rail (4).
2. Install the one nut (2) and four bolts (1) securing the battery tray (3) to the frame rail (4).
3. Tighten the nut to 10.5 Nm (93 in. lbs.).
4. Tighten the bolts to 10.5 Nm (93 in. lbs.).
5. Install the battery See: Service and Repair/Removal and Replacement/Battery - Installation.
6. On diesel engine equipped vehicles install the diesel vacuum valve. Push the bracket (1) down until the mounting tabs are completely seated into
the receptacles (2) in the battery tray.
