Compass 4WD L4-2.4L VIN W (2007)
Trunk / Liftgate Hinge: Service and Repair
Installation
INSTALLATION
NOTE: A suitable body sealant should be used when removing or moving the hinges.
1. If necessary, paint replacement hinge before installation.
2. Carefully, pry down headliner and install the nuts (1) and bolt (2).
3. Tighten fasteners to 15 Nm (11 ft. lbs.).
4. Install the liftgate bolts (1) and tighten to 15 Nm (11 ft. lbs.).
