Compass 4WD L4-2.4L VIN W (2007)
Trunk / Liftgate Striker: Service and Repair
Installation
INSTALLATION
1. Position the liftgate striker (1) onto the liftgate opening lower panel and align the striker to the previously marked location.
2. Install the two bolts (4) that secure the striker to the lower panel. Tighten the bolts to 23 Nm (17 ft. lbs.).
3. Check and adjust the striker if necessary.
4. Position the liftgate scuff plate (1) onto the liftgate sill and seat the retaining clips (2) fully.
