Compass 4WD L4-2.4L VIN W (2007)
Installation
INSTALLATION
1. Align the upper tab and position the upper B-pillar trim (1) into place and seat the trim fully.
2. Install and tighten the screw (3) that secures the turning loop to the height adjuster. Tighten the screw to 40 Nm (30 ft. lbs.).
3. Position the lower B-pillar trim (2) into place and seat fully.
C-Pillar Trim Panel-Removal
REMOVAL
Compass and Patriot
1. Remove the bolts (2) and remove the rear seat cushion (3).
