jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Sunroof / Moonroof Frame|Removal|Page 10246 > < Sunroof / Moonroof Frame|Removal|Page 10244
Page 1
background image

Sunroof / Moonroof Frame: Service and Repair
Installation

INSTALLATION

1. Install the trough guides.

2. Install the drive motor. 

3. Install the sunshade. 

4. Install the glass panel. 

5. Raise rear end of sunroof module assembly (1) and guide into position and start the six fasteners (3).

6. Visually line up the alignment guide holes (2) with the guide holes in the roof of the vehicle.

7. Tighten the six fasteners (3) to 9 Nm (80 in. lbs.).

8. Tighten the two side bracket fasteners (6) to 9 Nm (80 in. lbs.).

9. Connect the drain tubes (2) to the assembly (1).

Sunroof / Moonroof Frame|Removal|Page 10246 > < Sunroof / Moonroof Frame|Removal|Page 10244