Compass 4WD L4-2.4L VIN W (2007)
Parking Brake Lever: Service and Repair
Installation
INSTALLATION
1. Place the parking brake lever (6) on the mounting studs (5) affixed to the vehicle floor pan. Install and tighten the nuts to 28 Nm (250 in. lbs.).
2. Connect the wiring harness connector (2) to the parking brake switch (3).
CAUTION: A NEW parking brake cable equalizer (2) must be installed when servicing the parking brake cables or lever. The equalizer
has an integrated bent nail tensioner that needs to be stretched upon installation placing the correct tension on the cables.
3. Remove and install a NEW parking brake cable equalizer (2) on the parking brake lever output cable.
