Compass 4WD L4-2.4L VIN W (2007)
9. Remove the screw (1) fastening the cable routing clamp (3) to the rear suspension crossmember (4).
10. Remove the speed sensor cable routing clip (1) from the trailing link (2).
11. Remove the screw (4) fastening the cable routing clamp to the trailing link.
12. Unclip the wheel speed sensor head (1) from the spring-loaded retainer on the rear of the hub and bearing (2). Remove the sensor from the vehicle.
Installation
ALL-WHEEL-DRIVE
CAUTION: Failure to install speed sensor cables properly may result in contact with moving parts or an over extension of cables causing an
open circuit. Be sure that cables are installed, routed, and clipped properly.