Compass 4WD L4-2.4L VIN W (2007)
c.
Exhaust side middle bolt (3).
d.
Intake side middle bolt (4).
14.
Clean all RTV from the cylinder head surface and wipe the surface with a clean cloth.
15.
With a clean cloth, wipe the cylinder head cover gasket and inspect for damage (cuts, tears or voids). If damaged, replace with PN 04884765AA
center gasket and/or PN 04884762AA perimeter gasket.
16.
Apply a 1/8" (3mm) bead of Mopar Engine Sealant RTV to cylinder head/front cover T-joint (Figure 3).
17.
Position the cylinder head cover on the engine and install cylinder head cover studs as shown. (Figure 4).
18.
Position the cylinder head cover on the cylinder head and install all bolts.
