Compass 4WD L4-2.4L VIN W (2007)
Connecting Rod Bearing: Service and Repair
Connecting Rod Bearing Fitting
CONNECTING ROD - FITTING
There are three different sizes of rod bearings available. Connecting rod bearing identification (4) can be found on the nose of the crankshaft (3). Use the
table below for proper bearing selection.
Connecting Rod Bearing Selection
1. For measuring connecting rod bearing clearance procedure and use of Plastigage. For bearing clearance refer to Engine Specifications.
NOTE: The rod bolts should not be reused.
2. Before installing the NEW rod bolts the threads and under the bolt head should be oiled with clean engine oil.
