jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

A/C Discharge Line|Page 8050 > < A/C Discharge Line|Page 8048
Page 7
background image

16. Lower the vehicle.

17. Reconnect the negative battery cable.

18. Evacuate the refrigerant system.

19. Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Use only refrigerant oil of the type recommended for the

A/C compressor in the vehicle.

20. Charge the A/C system.

Lower A/C Suction Line

21. Position the lower A/C suction line (2) into the engine compartment.

22. Remove the tape or plugs from the suction line fitting and the compressor port.

23. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it and new gasket onto the suction line fitting. Use only the specified

O-ring as it is made of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the
vehicle.

24. Connect the lower A/C suction line to the A/C compressor (3).

25. Install the nut (1) that secures the A/C suction line to the A/C compressor. Tighten the nut to 20 Nm (15 ft. lbs.).

A/C Discharge Line|Page 8050 > < A/C Discharge Line|Page 8048