Compass 4WD L4-2.4L VIN W (2007)
7. Position the blower motor (3) into the bottom of the HVAC housing (4).
8. Install the wire lead bracket (2) and the three screws (1) that secure the blower motor to the HVAC housing. Tighten the screws to 1.2 Nm (10 in.
lbs.).
9. Position the blower motor resistor (6) into the HVAC housing.
10. Install the two screws (5) that secure the blower motor resistor to the HVAC housing. Tighten the screws to 1.2 Nm (10 in. lbs.).
11. Install the air inlet housing (3) onto the HVAC housing (1).
12. Install the air distribution housing (2) onto the HVAC housing.
NOTE: If the heater core is being replaced, flush the cooling system.
13. Install the HVAC housing assembly.
