jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Refrigerant|Description|Page 8105 > < Refrigerant|Description|Page 8103
Page 1
background image

Refrigerant: Tools and Equipment

REFRIGERANT SYSTEM SERVICE EQUIPMENT

WARNING:  Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the
warnings and cautions could result in possible personal injury or death.

WARNING:  Eye protection must be worn when servicing an air conditioning refrigerant system. Turn off (rotate clockwise) all valves on the
equipment being used, before connecting to or disconnecting from the refrigerant system. Failure to observe these warnings may result in
personal injury or death.

When servicing the A/C system, an R-134a refrigerant recovery/recycling/charging station that meets SAE standard J2210 must be used (1). Contact an
automotive service equipment supplier for refrigerant recovery/recycling/charging equipment. Refer to the operating instructions supplied by the
equipment manufacturer for proper care and use of this equipment.

A manifold gauge set (1) may be needed with some recovery/recycling/charging equipment. The manifold gauge set should have manual shut-off valves
(2 and 6), or automatic back-flow valves located at the service port connector end of the manifold gauge set hoses (4 and 5). This will prevent refrigerant

Refrigerant|Description|Page 8105 > < Refrigerant|Description|Page 8103