jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Standard Procedure|Page 11034 > < Standard Procedure|Page 11032
Page 3
background image

LAMP - WITHOUT FLASHLIGHT FEATURE

NOTE:  There are two types of cargo lamps available in this vehicle; one with and one without a removable flashlight feature.

1. Disconnect and isolate the battery negative cable.

2. Insert the tip of a small flat bladed screwdriver into the notch (5) between the lens (2) and the housing (1) on one side of the cargo lamp unit.

3. Gently pry the end of the lens downward until it unsnaps from the housing.

4. Swing the lens downward until it is perpendicular to the housing.

5. Pull the lens hinge/retainer end (3) of the housing downward slightly from the headliner, then slide the exposed end of the housing away from the

mounting hole far enough to disengage the fixed retainer (4) on the notched end from the headliner.

6. Pull the lamp away from the headliner mounting hole far enough to access and disconnect the wire harness connector from the connector

receptacle on the back of the lamp housing.

7. Remove the lamp from the vehicle.

Standard Procedure|Page 11034 > < Standard Procedure|Page 11032