Compass 4WD L4-2.4L VIN W (2007)
Spark Plug: Service and Repair
Installation
2.0/2.4L
Special care should be used when installing spark plugs in the cylinder head spark plug wells. Be sure the plugs do not drop into the wells, damage to the
electrodes can occur.
Always tighten spark plugs to the specified torque. Over tightening can cause distortion resulting in a change in the spark plug gap. Overtightening can
also damage the cylinder head.
1. To avoid cross threading, start the spark plug into the cylinder head by hand.
2. Tighten spark plugs to 17.5 ± 2 Nm (13 ± 2 ft. lbs.).
3. Install ignition coil on to spark plug.
