Compass 4WD L4-2.4L VIN W (2007)
1. Remove the second row seat cushion from the rear floor panel (3).
2. Remove the screw (1) that secures the center and left seat belt buckle unit (4) anchor plate and the left center seat back (2) hinge bracket to the rear
floor panel.
3. Remove the buckle unit from the rear floor panel.
Second Row - Right And Center Anchor
SECOND ROW - RIGHT AND CENTER ANCHOR
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.
1. Remove the second row seat cushion from the rear floor panel (1).
2. Remove the screw (3) that secures the right and center anchor seat belt buckle unit (2) anchor plate and the child anchor bracket (5) to the rear
floor panel.
3. Remove the buckle unit from the rear floor panel.
