Compass 4WD L4-2.4L VIN W (2007)
Wheel Speed Sensor: Description and Operation
Rear Wheel Speed
Description
DESCRIPTION
The antilock brake system uses two-wire wheel speed sensors, known as active wheel speed sensors. The sensors use an electronic principle known as
magnetoresistive to help increase performance and durability. The sensors convert wheel speed into a small digital signal. A Wheel Speed Sensor (WSS)
is used at each wheel. A magnetic pole encoder serves as the trigger mechanism for each sensor. At each wheel of the vehicle there is one wheel speed
sensor and one encoder.
On all-wheel-drive vehicles, the rear wheel speed sensor head (1) is secured to the rear hub and bearing (2) by a spring-loaded clip on the rear of the
assembly. The encoder is integral to the hub and bearing assembly. The encoder is serviced as part of the rear hub and bearing.
On front-wheel-drive vehicles, the rear wheel speed sensor head (3) is mounted to the rear of the hub and bearing by a screw. The encoder is integral to
the hub and bearing assembly. The encoder is are serviced as part of the rear hub and bearing.
The WSS air gaps are not adjustable.
Operation
OPERATION
