Compass 4WD L4-2.4L VIN W (2007)
Trailing Arm: Service and Repair
Installation
INSTALLATION
1. Position the trailing link and install the two bolts (2) fastening the leading end of the trailing link (3) to the body (1). Tighten the two mounting
bolts to 110 Nm (81 ft. lbs.).
2. Position the upper control arm on the trailing link (3) and install the bolt and nut (1) securing the arm to the link. Tighten the mounting bolt nut to
95 Nm (70 ft. lbs.).
3. Position the lower control arm on the trailing link (3) and install the bolt and nut (2) securing the arm to the link. Tighten the mounting bolt nut to
95 Nm (70 ft. lbs.).
