jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

BG6 Manual Transaxle|Page 5198 > < BG6 Manual Transaxle|Page 5196
Page 3
background image

1.   Remove gear shift boot.
2.   Remove the center console assembly. Remove rear power window switch (if equipped) and disconnect harness from console.

NOTE: Cable is pushed into a rubber grommet.

3.   Remove select cable (2) from shift lever (1).

4.   Remove shift cable retaining clip (3) and disconnect cable (2) from the shift lever (1).

BG6 Manual Transaxle|Page 5198 > < BG6 Manual Transaxle|Page 5196