jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Outside Door Handle Button - Inoperative|Page 6416 > < Evaporator/Cowl Screen - Revision|Page 6403
Page 1
background image

Front Door Exterior Handle: Customer Interest
Outside Door Handle Button - Inoperative

NO.:

23-09-92

GROUP:

Body

DATE:

Jun. 1, 1992

SUBJECT:
Outside Door Handle Button Inoperative

MODELS:

1993 (ZJ) Grand Cherokee

SYMPTOM/CONDITION:

The outside door handle button may be inoperative due to a binding condition in the door latch rods. The operation of the door lock cylinders or keyless
entry system could also be affected by the same condition. The source of the binding condition may be one of the following:

1 .

The front and/or rear door latch may be misadjusted causing poor latch operation.

2.

The front door handle-to-latch rod may be bent, preventing the door latch from being properly adjusted.

3.

On vehicles equipped with the Vehicle Theft Security System, the wiring harness for the security alarm switch may be misrouted and interfering
with the latch operation.

PARTS REQUIRED:

1

Assembly, Right Front Latch Release Handle

55030044

1

Assembly, Left Front Latch Release Handle

55030045

REPAIR PROCEDURE:

This procedure involves adjusting the fronvrear door latch mechanism, checking the front doors for a bent door handle-to-latch rod and inspecting the
wiring harness for the security alarm switch for proper routing.

1 .

Adjust the door latch mechanism as described in the 1993 Grand Cherokee Service Manual, Publication No. 81-370-2147, on page 23-16.

Outside Door Handle Button - Inoperative|Page 6416 > < Evaporator/Cowl Screen - Revision|Page 6403