jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Paint - Codes/Cross references/Applications|Page 7034 > < Paint - Codes/Cross references/Applications|Page 7032
Page 3
background image

Paint chipping at the upper corners of the D-pillar caused by contact with the plastic applique (See Figure 1).

PARTS REQUIRED:

2

4773279

Foam Strips

REPAIR PROCEDURE:

This bulletin involves repairing refinishing the damaged area and installing a foam strip to the D pillar applique.

1.

Remove both the D-pillar appliques by carefully prying the appliques off with a flat bladed screw driver.

2.

Brush touch the damaged area as required and allow the paint to dry.

3.

Install the foam strips, P/N 4773279, as shown in Figure 2.

4.

Install the D-pillar appliques.

Paint - Codes/Cross references/Applications|Page 7034 > < Paint - Codes/Cross references/Applications|Page 7032