jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Water Pump|Removal|Page 1600 > < Water Pump|Removal|Page 1598
Page 4
background image

Fig. 9 Fan Shroud Mounting

14. Remove the two fan shroud-to-upper radiator crossmember attaching nuts.
15. Remove the fan assembly and fan shroud (together as one unit) from the vehicle.

Fig. 10 Water Pump Remove/Install - 4.0L 6-Cylinder Engine

16. Remove the four pump mounting bolts and remove pump from vehicle. Discard old gasket. Note that one of the four bolts is longer than the other

bolts.

17. If pump is to be replaced, the heater hose fitting must be removed. Note position of fitting before removal.

Water Pump|Removal|Page 1600 > < Water Pump|Removal|Page 1598