jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Blend Door Actuator Replacement|Page 5281 > < Blend Door Actuator Replacement|Page 5279
Page 2
background image

9. Connect the battery negative cable.

Removal

1. Remove the heater-A/C unit from the vehicle.

See: Housing Assembly HVAC/Service and Repair/Heater - A/C Housing Removal and Installation

2. Turn the 'heater-A/C unit upside down,
3. Disconnect the electrical connection.
4. Remove the retaining screws.
5. Remove the heat/defrost door motor.

Installation

1. Install the heat/defrost door motor.
2. Install and tighten the retaining screws.
3. Connect the electrical connection.
4. Install the heater-A/C unit into the vehicle.

See: Housing Assembly HVAC/Service and Repair/Heater - A/C Housing Removal and Installation

Blend Door Actuator Replacement|Page 5281 > < Blend Door Actuator Replacement|Page 5279