Grand Cherokee 2WD L6-242 4.0L VIN S MFI (1993)
Torque Converter Clutch Solenoid: Service and Repair
NOTE: The valve body must be removed from the transmission to replace the lock-up solenoid. See: Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Installation
REMOVAL
Solenoid Assembly Removal
1.
Remove the solenoid assembly from the lower housing.
3-4 Accumulator Removal
2.
Remove the screws attaching the 3-4 accumulator housing, and solenoid case connector to the lower housing.
3.
Remove the solenoid case connector from the 3-4 accumulator housing. Note the connector is attached with a shoulder type screw that must be
used for reinstallation of the connector.
INSTALLATION
