jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Service Procedures|Page 7633 > < Service Procedures|Page 7631
Page 6
background image

Cluster Bulb Locations

(2) Remove the bulb and socket from the rear cluster circuit and gauge housing by using a twisting motion.

(3) Unplug the bulb from the socket.

(4) Reverse the removal procedures to install.

Left/Outboard Switch Pod

LEFT/OUTBOARD SWITCH POD

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

(1) Remove the cluster bezel as described.

Left Switch Pod Remove/Install

(2) Remove the two screw securing the left switch pod to the instrument panel.

(3) Pull the left switch pod out from the instrument panel far enough to unplug the wiring connectors.

(4) Remove the left switch pod from the instrument panel.

Service Procedures|Page 7633 > < Service Procedures|Page 7631