jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Service Procedures|Page 7634 > < Service Procedures|Page 7632
Page 7
background image

(5) Reverse the removal procedures to install.

Right/Inboard Switch Pod

RIGHT/INBOARD SWITCH POD

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

(1) Disconnect and isolate the battery negative cable.

(2) Remove the right switch pod bezel as described.

Right Switch Pod Remove/Install

(3) Remove the three screws securing the right switch pod to the instrument panel.

(4) Pull the right switch pod out from the instrument panel far enough to unplug the wiring connectors.

(5) Remove the right switch pod from the instrument panel.

(6) Reverse the removal procedures to install.

Body Control Module

BODY CONTROL MODULE

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

(1) Remove the knee blocker/steering column cover as described.

Service Procedures|Page 7634 > < Service Procedures|Page 7632