Grand Cherokee 2WD L6-4.0L VIN S (1997)
Glove Box Latch And Handle Remove/Install
(5) Remove the other glove box latch handle screw.
(6) Remove the latch and handle from the glove box door as a unit.
(7) Reverse the removal procedures to install.
Glove Box Lock Cylinder
(1) Remove the glove box latch and handle as.
(2) Insert the key into the glove box lock cylinder.
Glove Box Lock Cylinder Remove/Install
(3) Insert a small screwdriver into the retaining tumbler release slot and depress the retaining tumbler.
(4) Pull the lock cylinder out of the latch handle by using a gentle twisting and pulling action on the key.
(5) Reverse the removal procedures to install.
Glove Box Lamp and Switch
GLOVE BOX LAMP AND SWITCH
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
(1) Remove the lower right instrument panel module as described.
