jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Service Procedures|Page 7640 > < Service Procedures|Page 7638
Page 13
background image

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

(1) Disconnect and isolate the battery negative cable.

(2) Pull the cigar lighter knob and element out of the cigar lighter base.

Cigar Lighter Remove/Install

(3) Look inside the cigar lighter base and note the position of the retaining bosses.

(4) Insert a pair of external snap ring pliers into the cigar lighter base and engage the tips of the pliers with the retaining bosses.

(5) Squeeze the pliers to disengage the retaining bosses from the base, and using a gentle rocking motion, pull the pliers and the cigar lighter base out of

the light ring/retainer.

(6) Remove the pliers from the cigar lighter base and unplug the wiring connector.

(7) Remove the cigar lighter light ring/retainer from the instrument panel and unplug the wiring connector.

(8) Reverse the removal procedures to install.

Power Outlet

POWER OUTLET

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

(1) Remove the lower right instrument panel module as described.

(2) From the rear of the instrument panel center bezel, unscrew the power outlet shell clamp from the power outlet base.

(3) From the front of the instrument panel center bezel, remove the power outlet base.

Service Procedures|Page 7640 > < Service Procedures|Page 7638