Grand Cherokee 2WD L6-4.0L VIN S (1997)
Glove Box Components
(2) Remove the two screws securing the bezel at the top of the glove box inner door panel.
(3) Pull the bezel firmly away from the outside glove box door. There is double-faced adhesive tape between the bezel and the outer door panel.
(4) Reverse the removal procedures to install.
Glove Box Hinge
(1) Remove the glove box.
(2) Remove the screws securing the glove box hinge to the glove box door.
(3) Remove the glove box hinge.
(4) Reverse the removal procedures to install.
Glove Box Bin
(1) Remove the glove box.
(2) Remove the glove box hinge as described.
(3) Remove the screws securing each side of the bin to the glove box door.
(4) Remove the glove box bin.
(5) Reverse the removal procedures to install.
Glove Box Latch And Handle
(1) Remove the glove box.
(2) Remove the glove box hinge and bin as described.
(3) Remove the two bezel screws, two latch screws and one handle screw from the inner door panel.
(4) Remove the inner panel from the glove box door.
