Grand Cherokee 2WD L6-4.0L VIN S (1997)
Junction Block Remove/Install
(7) Remove the junction block mounting bolt.
(8) Lift upwards on the junction block to remove its slide-tab mount off of the mounting bracket on the right cowl side panel.
(9) Remove the junction block from the vehicle.
(10) Reverse the removal procedures to install.
Instrument Panel Assembly
INSTRUMENT PANEL ASSEMBLY
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
(1) Disconnect and isolate the battery negative cable.
(2) Remove the left and right switch pod bezel as.
(3) Remove the knee blocker as described.