Grand Cherokee 2WD L6-4.0L VIN S (1997)
Turn Signal Relay: Description and Operation
Right Turn Relay
CIRCUIT OPERATION
Power for the coil side of the right turn relay is supplied by circuit L60. This circuit connects to the right side turn signal lamps. Ground for the
coil side of the relay is supplied on circuit Z1.
When the operator turns the right turn signal ON, power flows through the coil in the relay to ground causing the contacts in the relay to switch
from the normally CLOSED position to connect circuits 94 and L60.
Circuit 94 is the feed for the contact side of the relay. Circuit L60 connects from the relay to the trailer tow connector.
Circuit 94 is fed power through the normally CLOSED side of the stop lamp relay by circuit F70. Circuit F70 is HOT at all times and protected by
a circuit breaker located in the right rear quarter panel.
