Grand Cherokee 2WD L6-4.0L VIN S (1997)
Evaporative Emission Control Canister: Service and Repair
EVAPORATIVE (EVAP) CANISTER
Fig. 16 EVAP Canister Location
The EVAP canister is located in the left front corner of vehicle below the left front headlamp (Fig. 16).
REMOVAL
1. Remove the grill.
2. Remove the front bumper/fascia assembly.
3. Disconnect vacuum lines at canister.
4. Remove the canister mounting nuts.
5. Lower the canister through bottom of vehicle.
INSTALLATION
1. Position canister to body
2. Install canister mounting nuts. Tighten nuts to 9 Nm (80 in. lbs.) torque.
3. Connect vacuum lines. Be sure vacuum lines are firmly connected and not leaking or damaged. If leaking, a Diagnostic Trouble Code (DTC) may
be set with certain emission packages.
4. Install the front bumper/fascia assembly and grill.