Grand Cherokee 2WD L6-4.0L VIN S (1997)
2.
Disconnect the 4-way connector from the leak detection pump. The pump is located in the front left corner of the engine compartment, below the
evap canister purge solenoid (Figure 1).
3.
Install the jumper harness p/n 04897408AA between the leak detection pump and vehicle harness.
4.
Tie wrap any excess harness out of the way.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
25-01-10-90
0.2 Hrs.
FAILURE CODE:
XX - Service Adjustment
