Grand Cherokee 2WD L6-4.0L VIN S (1997)
^
Using the part code in the third column of the VIN list along with the table (involved dealers):
^
Using the VIN and part number list electronically transmitted to DIAL System Function 53 (involved dealers) or
^
Entering the VIN to the DIAL VIP System (sales code information) along with the table (all dealers).
Each parts package contains the following components:
Quantity
Description
1
Fuel Tank Sending Unit
1
Seal Fuel Tank Module
2
J-Bolt, Fuel Tank Strap (XJ only)
2
Nut Fuel Tank Strap (XJ only)
4
Push Clips Splash Shield (TJ only)
1
Tie Strap (TJ only)
Owner Notification and Service Scheduling
All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for this service with their dealers. A copy of the owner notification letter is included.
Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer
reference as needed.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.
Use one of the following labor operation numbers and time allowances:
Replace fuel tank sending unit:
^
Grand Cherokee (ZJ) and Cherokee (XJ) vehicles:
^
Without a Skid Plate
^
With a Skid Plate
^
Wrangler (TJ) vehicles
Labor Operation Number
Time Allowance
14755182
0.8 hours
14755183
1.1 hours
14755184
1.3 hours
Add the cost of the recall parts package plus applicable dealer allowance to your claim.
Note:
See the Warranty Administration Manual, Recall Claim Processing Section for complete recall claim processing instructions.
Parts Return
Not required.