jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Circuit Operation|Page 419 > < Circuit Operation|Page 417
Page 3
background image

_14-031b- FUEL SYSTEM 14 - 31Fig. 3 Camshaft Position Sensor-Typical (5.2U5.9LDistributor Shown)Fig. 4 Crankshaft Position Sensor-5.2LI5

The sensor is bolted to the transmission bellhousing.

The engine will not operate if the PCM does not receive a crankshaft position sensor input.

Data Link Connector

DATA LINK CONNECTOR-PCM INPUT AND OUTPUT

Fig. 14 DLC Location

The 16-way data link connector (diagnostic scan tool connector) links the Diagnostic Readout Box (DRB) scan tool or the Mopar Diagnostic
System (MDS) with the Powertrain Control Module (PCM). The data link connector is located under the instrument panel to the left of the
steering column.

Engine Coolant Temperature Sensor

ENGINE COOLANT TEMPERATURE SENSOR-PCM INPUT

Circuit Operation|Page 419 > < Circuit Operation|Page 417