Grand Cherokee 2WD L6-4.0L VIN S (1997)
Heated Glass Element Switch: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick or other suitable wide flatbladed tool, pry gently around the edges of the inboard switch pod bezel and remove the bezel.
Inboard Switch Pod Remove/Install
3. Remove the three screws that secure the inboard switch pod to the instrument panel.
4. Pull the inboard switch pod out from the instrument panel far enough to unplug the wire harness connectors.
5. Remove the inboard switch pod from the instrument panel.
6. Reverse the removal procedures to install.
