jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Heated Glass Element Switch|Description and Operation|Page 10250 > < Diagnostic Charts|Page 10245
Page 1
background image

Heated Glass Element Switch: Description and Operation

SYSTEM OPERATION

The rear window defogger switch is mounted in the inboard instrument panel switch pod, inboard of the steering column. The momentary-type
switch provides a hard-wired ground signal to the Body Control Module (BCM) each time it is depressed. The BCM rear window defogger timer
and logic circuitry responds by energizing or de-energizing the rear window defogger relay.

Energizing the rear window defogger relay provides electrical current to the rear window defogger grid and the Light-Emitting Diode (LED) in the
switch, which lights to indicate that the defogger system is turned on. The defogger switch and LED cannot be repaired. If faulty, the inboard
switch pod unit must be replaced.

Heated Glass Element Switch|Description and Operation|Page 10250 > < Diagnostic Charts|Page 10245