Grand Cherokee 2WD V6-3.7L (2008)
Passenger Assist Handle: Service and Repair
Panel-A-Pillar Trim/Grab Handle
Removal
REMOVAL
1. Using a small flat-bladed tool, carefully open the two fastener covers located in the A-pillar trim panel.
2. Remove the two bolts that secure the A-pillar trim panel to the A-pillar and remove the trim panel.
Installation
INSTALLATION
1. Position the locating tabs of the A-pillar trim panel into the slots located in the top of the instrument panel.
2. Install the A-pillar trim panel onto the A-pillar and install the two bolts. Tighten the bolts to 6 Nm (55 in. lbs.).
3. Close the two fastener covers located in the A-pillar trim panel.