Grand Cherokee 2WD V6-3.7L (2008)
7. Install the motor as necessary. See: Sunroof / Moonroof Motor/Service and Repair/Removal and Replacement/Sunroof Motor With Control Unit -
Installation
8. Install the drain channel arms (3) into the mechanism (1) holes one at a time with the reinforcements on the inside of mechanism arms (2).
CAUTION: Do not pry the channel arms apart at the same time or you could break the drain channel.
9. Install the sunroof assembly into the vehicle. See: Service and Repair/Installation
10. Perform the sunroof position calibration, See: Testing and Inspection/Programming and Relearning/Sunroof Position Calibration.
11. Perform the Excessive Force Limitation (EFL) calibration, .
12. Install the glass as necessary. See: Sunroof / Moonroof Panel/Service and Repair/Installation
13. Adjust sunroof glass to fit flush with roof line See: Sunroof / Moonroof Panel/Adjustments.
14. Verify proper operation of the power sunroof system.
