Grand Cherokee 2WD V6-3.7L (2008)
Seat Back: Service and Repair
Seat Back - Installation
INSTALLATION
1. Place the rear seat back into position by slipping the hinge bracket onto the two outboard lower bolts.
2. Install the other four mounting bolts (1). Remember to install the three inner seat belt buckles. Torque the bolts to 50 Nm (37 ft. lbs.).
3. Slide the two outboard seat belt anchors (2) onto the outboard lower bolts (1). Tighten bolts to 50 Nm (37 ft. lbs.).
4. Install the rear seat cushion See: Seat Cushion/Service and Repair/Seat Cushion - Installation.
