Grand Cherokee 2WD V6-3.7L (2008)
3. Connect the new heating element electrical connectors (3 and 4). Front passenger seat shown, Driver seat similar.
NOTE: Make certain the seat wire harness is correctly routed through the seat and seat back. The excess wire between the cushion and
back elements should be securely tucked between the rear of the cushion foam and the rear carpet flap of the trim cover.
4. For 2nd row heated seats connect the new heating element electrical connectors.
NOTE: Make certain the seat wire harness is correctly routed through the seat and seat back. All wire harness routing clips should be
correctly installed (1) and the harness leads for the 2nd row seat back should be positioned in the proper cushion opening (2).
5. Connect the battery negative cable.
6. Verify heated seat system operation.
