Grand Cherokee 2WD V6-3.7L (2008)
4. Install caliper (5) on the caliper adapter (2).
5. Install the caliper slide pin bolts (2) and tighten to 44 Nm (32 ft. lbs.).
6. Install wheel and tire assembly.
7. Remove support and lower vehicle.
8. Pump brake pedal until caliper pistons and brake pads are seated and a firm brake pedal is obtained.
9. Fill brake fluid.
Rear
REAR
1. Install the inboard & outboard brake pads onto the caliper.
2. Lubricate the slide pins and slide pin bushings with caliper slide grease or the grease provided with the brake pads.
3. Install caliper (1) on the anchor.