Grand Cherokee 2WD V6-3.7L (2008)
14. Remove the 2 front cable routing clamps and the 3 nuts (2&4).
15. Remove the front cable at the rear floor bracket.
16. Remove the front cable (3) at the hand lever (1).
17. Remove the front cable at the hand lever mounting bracket.
Rear
REAR
1. Remove the rear seat bottom See: Body and Frame/Seats/Seat Cushion/Service and Repair/Seat Cushion - Removal.
2. Disconnect the (FDCM) final drive control module electrical connectors (1).
3. Remove the (FDCM) module bracket (2) mounting nuts.
4. Remove the rear sill plates.
5. Roll the carpet back to access the rear park brake cables.