Grand Cherokee 2WD V6-3.7L (2008)
Rocker Arm Assembly: Service and Repair
Removal
REMOVAL
NOTE: Disconnect the battery negative cable to prevent accidental starter engagement.
1. Remove the cylinder head cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Removal
2. For rocker arm removal on cylinder No. 4, Rotate the crankshaft until cylinder No. 1 is at BDC intake stroke.
3. For rocker arm removal on cylinder No. 1, Rotate the crankshaft until cylinder No. 1 is at BDC combustion stroke.
4. For rocker arm removal on cylinders No. 3 and No. 5, Rotate the crankshaft until cylinder No. 1 is at TDC exhaust stroke.
5. For rocker arm removal on cylinders No. 2 and No. 6, Rotate the crankshaft until cylinder No. 1 is at TDC ignition stroke.
6. Using the Remover/Installer 8516 (2), press downward on the valve spring, remove rocker arm.