Grand Cherokee 2WD V6-3.7L (2008)
Crankshaft Main Bearing: Specifications
Torque Specifications
When installing the bedplate retaining bolts, make sure to place the stud bolts in the correct location.
Torque the bolts in the sequence shown.
-
Hand tighten bolts 1D,1G and 1F until the bedplate contacts the block.
-
Tighten bolts 1A - 1J to 54 Nm (40 ft. lbs.)
-
Tighten bolts 1 - 8 to 7 Nm (62 in. lbs.)
-
Turn bolts 1 - 8 an additional 90°.
-
Tighten bolts A - E 27 Nm ( 20 ft. lbs.).