Grand Cherokee 2WD V6-3.7L (2008)
Engine Mount: Service and Repair
Engine Mount - Installation
Front Engine Mount
INSTALLATION
1. Install the engine mount (1).
2. Tighten the bolts to 30 Nm ( 22 ft.lbs.).
3. Lower the engine.
4. Install the through bolts and nuts.
5. Lower vehicle.
6. Connect negative battery cable.
Rear Engine Mount
INSTALLATION
4X2
1. Install the transmission mount bracket (2), if removed.
2. Position the transmission mount (3) on the transmission mount bracket (2). Install the fasteners (1) that attach the transmission mount to the
bracket.
3. Tighten the bolts to 30 Nm ( 22 ft.lbs.).
4. Install the crossmember.