Grand Cherokee 2WD V6-3.7L (2008)
8. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle See: Body and Frame/Interior Moulding /
Trim/Carpet/Service and Repair/Carpet - Removal.
9. Disconnect the left rear floor duct (1) and the right rear floor duct (2) from the rear floor distribution duct (3).
10. Disengage the retainer that secures the rear floor ducts to the floor support and remove the floor ducts.
11. Disconnect the rear floor distribution duct from the air distribution housing (4) and remove the distribution duct.
Floor Distribution Ducts - Installation
INSTALLATION
FRONT FLOOR DUCTS
NOTE: Illustration shown with instrument panel, gear selector and console duct removed for clarity.
1. Position the right front floor duct (5) and left front floor duct (6) into the vehicle
2. Connect the front floor ducts to the rear of the air distribution housing (4).
3. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
REAR FLOOR DUCTS
NOTE: LHD model shown in illustrations. RHD model similar.
